Wonderware InTouch Installation With Symbol Factory

Posted by

A step by step guide for your Wonderware InTouch Installation. Install Wonderware InTouch with symbol factory and other plugins. Here in this post, I will discuss how to add symbol factory plugin in the InTouch. If you have already installed Wonderware InTouch, you must read this post till end to know how to add Symbol factory in already installed InTouch Wonderware.

To know more about Symbol Factory and its features visit this page.

Wonderware InTouch Installation – Steps

Steps to install your Wonderware InTouch application with symbol factory added to it. Carefully observe each step for better installation. Here we go.

Note – If you have already installed Wonderware InTouch and missing symbol factory component in it, jump to step 4.

Step 1 – Download the Software File

First and foremost requirement is, you have the application. In light of this, you have to download the application file if you don’t have it. To download Wonderware InTouch, visit this page.

Likewise, choose the product you want to install in your system. When you visit above mentioned page you may not find the specific file you want to download. To download it visit official site of Wonderware InTouch.

Do the required registration to get free evaluation copy.

Step 2 – Open the file and click setup

Wait.  When you open the folder, you will find two setup files. Now, you don’t need to click on both the files. Click setup file (type application i.e. .exe) with smaller size. Size may vary between 300 Kb – 500 Kb.

Step by step guide for Wonderware InTouch Installation

 

Here, Setup file of 308 Kb is the target file. Click it.

Step 3 – Accept License Agreement

After you click the setup file a new window pops up. Window looks like

Step by step guide for Wonderware InTouch Installation

 

Click next button. When you click next you will be taken to a new window. Click on the radio button I accept the License Agreement. Then, click next again.

Step by step guide for Wonderware InTouch Installation

 

Step 4 – Choose Components to Install

Step by step guide for Wonderware InTouch Installation

 

This step is very crucial for first time installation as well as for already installed application. For already installed application this step teaches how to add or install Symbol factory in Wonderware InTouch. While choosing the components one must carefully select the components that would be required for development of a full functional project.

Step by step guide for Wonderware InTouch Installation

 

Click next again after you have selected required components for Wonderware InTouch Installation.

Step by step guide for Wonderware InTouch Installation

 

Step 5 – Create username and password

Step by step guide for Wonderware InTouch Installation

 

You will be prompted to create username and password for successful completion of Wonderware InTouch Installation. This step is mandatory. In order to have successful installation of the application you have to create a username and password. This will pop up when you don’t create it.

Step by step guide for Wonderware InTouch Installation

 

In light of this create a username and password.

Step by step guide for Wonderware InTouch Installation

 

After you have created username and password, click next.

Step 6- Review Components

After clicking next you will be asked to review the components you have selected to be installed in addition to Wonderware InTouch Installation.

Step by step guide for Wonderware InTouch Installation

 

Review the components and click next.

That is it. You will find a window shown below. Which means application installation is in process.

Step by step guide for Wonderware InTouch Installation

Step by step guide for Wonderware InTouch Installation

Once extraction and installation of files is complete you will find a final window.

Step by step guide for Wonderware InTouch Installation

Note – If you want to install Wonderware application server click finish. If you don’t want to install Wonderware application server uncheck the box on left bottom of the window. Then click finish.

If you liked this post please like and follow us @Facebook.

2 comments

    1. You can put your file in the Intouch files folder and then when you launch intouch you must select the desired application had made

Leave a Reply

Your email address will not be published. Required fields are marked *